ASPHALT BINDER

An Asphalt Emulsion Tack Coat Designed For Priming Oxidized Surfaces And Patchwork.

Primer For:

• Asphalt Patching
• Asphalt Paving
• Coatings & Repair Products

Sizes Available

5 Gallon Pail, 55 Gallon Drum, Bulk

Coverage

Dependant upon water dilution.

Asphalt Binder Description

Asphalt Binder is an anionic asphalt emulsion designed for use as a tack coat for patching, paving, and coating processes. Asphalt Binder promotes adhesion of bituminous concrete products and coatings. Asphalt Binder also meets the ISSA requirements for SS1h.

Uses

Asphalt Binder™ is designed as an adhesion promoter for patching, paving, and coatings.

Application

Apply properly mixed Asphalt Binder (Asphalt Binder, Water) with spray equipment, brush, or squeegee. Stir material thoroughly before applying.

Mixing Procedures

• For Use As A Primer For Coatings: Apply properly diluted Asphalt Binder (1 part Asphalt Binder, 8 parts water) at a rate of .07 – .10 gallon per square yard (90-130 square feet per gallon).

• For Use As A Tack Coat For Patching Or Paving: Apply properly diluted Asphalt Binder (1 part Asphalt Binder, 1 part water) at a rate of .07 – .10 gallon of mix per square yard (90-130 square feet per gallon of mix).

Important

Apply coatings, patching materials, or paving materials as soon as possible after Asphalt Binder dries (within 24 hours) in order to maintain tackifying properties.

Clean Up

Wash tools in water before material dries.

Download or View MSDS

Download or View Spec Sheet