Oil Spot Primer- James Kurpiel Inc.
Oil Spot Primer- James Kurpiel Inc.
PETRO SEAL
OIL SPOT PRIMER
• Can be diluted up to one part Petro Seal and two parts water.
• Apply by spray or brush.
• Available in 5 gallon pails and 55 gallon drums.
Sizes Available
5 Gallon Pail, 55 Gallon Drum
Coverage
One gallon of Petro Seal when mixed 1 to 1 with water will cover approximately 300-400 square feet.
Description
A concentrated polymer based emulsion designed to seal oil and grease spots or stains prior to the application of pavement sealers over asphalt surfaces.
Surface Preparation
Scrape, wire brush, or burn off excessive build-up of oil and grease.
Mixing Procedures
Petro Seal™ can be diluted up to 1 part Petro Seal and 2 parts water.
Application
Apply with brush, roller or spray. Allow Petro Seal™ to dry completely before applying pavement sealer.
Important
Temperatures must be above 50°F both during application and for a period of at least 24 hours after application.
Do not apply when rain is imminent or forecast.
Clean Up
Wash tools in water before material dries.
Download or View MSDS
Download or View Spec Sheet
James Kurpiel Inc – SEALMASTER Product Distributor
19 Orchard St. – Hackensack, N.J. 07601
Toll Free at 1-800-273-9769
(201) 342-3170
Leave A Comment
You must be logged in to post a comment.